Wybron PS600 Bedienungsanleitung PDF herunterladen (Seite 14)

Front and Back Panels

See the diagram on the next page.

The Net IT has one IEC universal power connector.

There are two 5-pin XLR output ports located on the unit. These are labeled “Port A” & “Port B”

and output DMX/RDM on two universes.

The Net-IT PS-600 has six 4-pin XLR connectors for connecting Wybron products. They transfer

Universe A data and 24 volt DC power.

There is one Ethernet connector.

There are 5 LEDs that indicate the following:

- One green LED labeled “LAN” flashes if the Net-IT is connected to a network.

- One green LED labeled “100Mbps” that stays on if lit the link speed is 100Mbps.

- Two blue LEDs stay on if DMX is being transmitted on port A or B (happens during and

after Infogate Discovery command). They flash if DMX is being received from the

network.

- Two blue LEDs flash when RDM is being transmitted or received on port A or B.

The PAGE button is use to backlight the display and scroll through the different pages of

information.

If the RESET button is pressed and held for 10 seconds the Net-IT executes a factory default

reset.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Keine Kommentare

Wybron PS600 Bedienungsanleitung Seite 14