Wybron Nexera LX Spezifikationen

Color Mixing Luminaire

10Fixture Setup and ConfigurationInstalling the LampDisconnect fixture from line voltage before replacinglamp.Lamp and lamp mounting surfaces are hot!

11Lamp OptimizationThe Nexera lamp position system consistsof four knobs. This system allowschanges made to the Z-axis to occurwithout disturbing the

12Attaching Accessories to the Front HolderNexera can accept up to two standard accessories.(7.5” for the wash, 6.25” for the profile) Accessoriesare

13Nexera and The RAM SystemThe Nexera gets power from the RAM Power Supply, making it a RAM Systemcompatible device. The system consists of one or mor

14Head-Feet RestrictionsHead-Feet is defined as “the sum of cable lengths from each Nexera color module to asingle power supply output”. The Head-Fee

15DMX Setup and OperationControls and IndicatorsNexera has controls and indicators as follows: A three character seven-segment display 4 push butt

16Menu Tree and NavigationNexera’s operating channel is set like other RAM compatible products.DMX channel = Nexera start channel + Power supply start

17Display MessagesDisplayed for 2 seconds after power up, indicates the version (F) andrevision (9) of software installed in the unit.Indicates that t

18ServiceLamp ReplacementDisconnect fixture from line voltage before replacinglamp.Lamp and lamp mounting surfaces are hot! Allow lampto cool before r

19Cleaning the Color Module Remove the color module from the front barrel by removing four screws indicated inthe figure. Use a DMX source and a R

2TABLE OF CONTENTSProduct Modification Warning ...3Important Safe

20Replacing the FuseThe fuse is located on the same panel as the XLR connectors. Check the fuse if the unitdoes not operate and the red power indicat

21Reprogramming via the ISP PortNexera’s software can be upgraded using the Atmel ISP Programmer. These areavailable from DigiKey (www.digikey.com) f

22 Click Tools, STK500/AVRISP/JTAGICE, STK500/AVRISP/JTAG ICE… as shownbelow After the AVRISP window opens check that the ISP programmer was detec

23 Click on the ‘Fuses’ tab of the AVRISP window. Verify that the fourth option on the list“Preserve EEPROM memory through the Chip Erase cycle” fus

24 In the middle section of the AVRISP window marked ‘Flash’ click on the “ .. “ button tobrowse to the .hex file previously downloaded from www.wyb

25Appendix 1Color TableDMX decimalDMX%CyanMagentaYellowCyanMagentaYellowColor #Color NameChan 1Chan 2Chan 3Chan 1Chan 2Chan 3----NO COLOR0000%0%0%G110

26L117STEEL BLUE15108959%0%35%L118LIGHT BLUE20707781%0%30%L124DARK GREEN216020385%0%80%L126MAUVE121255047%100%0%L128BRIGHT PINK0203430%80%17%L132MEDIU

27Warranty InformationWYBRON, INC. warrants to the original owner or retail customer that for a periodof one year from date of delivery of a portable

3SAVE THESE INSTRUCTIONSREAD AND FOLLOW ALLINSTRUCTIONS This manual gives step-by-step instructions for preparation,setup, and operation of the Nexer

4To protect yourself and others from electric shock:• If the Nexera fixture was received without an AC cord plug attached, attach theappropriate lamp

5IntroductionNexeraTM is Wybron's family of affordable dichroic CMY color mixing luminaires expresslydesigned to complement your current equipmen

6Nexera Fixture SpecificationsModel 2560: Nexera Wash - TungstenDimensions:Height (with yoke attached): 551.82 mm / 21.73 inchesWidth (with yoke attac

7Model 2570: Nexera Profile - TungstenDimensions:Height (with yoke attached): 551.82 mm / 21.73 inchesWidth (with yoke attached): 301.88 mm / 11.86 in

8Model 2580: Nexera Wash - CDMDimensions:Height (with yoke attached): 551.82 mm / 21.73 inchesWidth (with yoke attached): 270.64 mm / 10.65 inchesLeng

9Model 2600: Nexera Profile - CDMDimensions:Height (with yoke attached): 551.82 mm / 21.73 inchesWidth (with yoke attached): 301.88 mm / 11.88 inchesL